PRODUCT NAME:
Brighto Aluminium Finish

PACK SIZE:
0.25L ,0.91L, 3.64L

COLOUR RANGE:
Silver

DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry:   1 – 2 Hours
Recoat:        4 – 6 Hours
Hard dry:     14 – 16 Hours

PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 14 - 16 m² /liter /coat.

APPLICATION:
1. Brush
2.Roller
3.Spray

CLEANING UP:
Clean all equipment with Mineral turpentine immediately after use.

SPRAY RECOMMENDATIONS:
Conventional Spray Satisfactory through most equipment

SURFACE PREPARATION:
New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces and dust off. Apply Brighto Red Oxide Primer on all metal surfaces in order to prevent form rust. Allow the Surfaces to dry completely. Stir paint thoroughly before use.