BRIGHTO Perfumed Gloss Finish is a high quality air drying paint. It maintains its consistent high gloss for years. It is suitable for use on all types of interior and exterior wood, metal surfaces. Brighto Perfumed Gloss Finish gives a smooth mirror like finish.

PACK SIZE:
0.91L, 3.64L

COLOUR RANGE:
See appropriate shade card

FILM PROPERTIES:
Chemical resistance Resistant to mild chemical fume attack
Water Resistance Resistant to the levels of atmospheric humidity present in normal environment

COMPOSITION (Nominal):
Pigment: Lightfast Pigments
Binder: Alkyd Resin
Solvent: Mineral Turpentine

VOLUME SOLIDS:
White 43 ± 2% (nominal), other colors will vary.

DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry 3-4 Hours
Dry to recoat 7-8 Hours
Hard Dry 24 Hours

FILM THICKNESS/COAT:
Wet: 60 - 75 Micrometers
Dry : 26 - 33 Micrometers

FLASH POINT :
38^o C

PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 14-17 m² /liter /coat.

APPLICATION:
Brush
Roller
Spray

THINNING:
Brush or Roller: 10-25% for Brush or Roller
Conventional spray: 30 - 40 % for Spray

SPRAY RECOMMENDATIONS:
Conventional Spray
Satisfactory through most equipment

CLEANING UP:
Clean all equipment with Mineral turpentine immediately after use.

SURFACE PREPARATION:
New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces and dust off. Apply Brighto Red Oxide Primer on all metal surfaces in order to prevent from rust. Apply Brighto Undercoat on all Wood surfaces. Apply Brighto Grey Oil Putty on all automobile surfaces. Allow the Surfaces to dry completely. Stir the paint thoroughly before use.

SYSTEM INFORMATION:
Wood, Metal