|
PRODUCT NAME: Brighto Perfumed Matt Finish
USAGE: Brighto Perfumed Matt Finish is a high quality solvent-based super Matt Finish, suitable for use on all type of interior & exterior wood, metal & masonry surfaces. Brighto Perfumed Matt Finish has good resistance to steam & moisture, which makes it ideal for use in kitchens, bathrooms and high traffic areas (TV Lounge, Stairs, etc.).
PACK SIZE: 0.91L, 3.64L & 14.56L
COLOUR RANGE: See appropriate shade card
DRYING TIMES: Depends on temperature, humidity, air movements & film thickness Touch Dry: 3 – 4 Hours Dry to Recoat: 7 - 8 Hours Hard dry: 24 Hours
APLICATION: Brush, Roller, Spray
PRACTICAL COVERAGE: A guide to the practical coverage which can be achieved under normal conditions is 13 – 19 m2 /liter /coat.
CLEANING UP: Clean all equipment with Mineral turpentine immediately after use. SURFACE PREPARATION: New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the Surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. Apply Brighto Red Oxide Primer on all metal surface in order to prevent from rust. Remove old masonry surface defects by using Brighto Super Filler. Apply Brighto Primer products according to surface requirements. Stir thoroughly before use.
SYSTEM INFORMATION:
Wood Metal Masonry
|


FILM PROPERTIES Chemical resistance: Resistant to mild chemical fume attack.
THINNING: Brush or Roller: 10 - 25% Conventional spray: 30 - 40%
FLASH POINT 38oC Degree
WATER RESISTENCE: Resistant to the levels of atmospheric humidity present in normal environment. Not suitable for use on immersed surfaces.
COMPOSITION (nominal): Pigment: Lightfast Pigments Binder: Alkyd Resin Solvent: Mineral Turpentine
VOLUME SOLIDS: White 45 ± 2 % (nominal), other colours will vary.
FILM THICKNESS/COAT: Wet: 50 – 75 Micrometers Dry : 22 - 36 Micrometers
|