PRODUCT NAME:
Brighto Red Oxide Primer

USAGE:
Brighto Red Oxide Primer is used for interior and exterior metal work including steelwork and iron.

PACK SIZE:
0.91L,3.64L,14.56L

COLOUR RANGE:
Red only.

DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry 2 - 4 Hours
Recoat 6 - 8 Hours
Hard Dry 16-18 Hours

PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 13 – 20 m² /liter /coat.

APPLICATION:
Brush Roller Spray

SPRAY RECOMMENDATIONS:
Conventional Spray Satisfactory through most equipment

CLEANING UP:
Clean all equipment with Mineral turpentine immediately after use

SURFACE PREPARATION:
New or Previously Painted Surfaces must be clean, dry and free from grease, rust dust etc. Rub down the surfaces with the help of abrasive paper and remove previous paint. Clean with the help of cloth. Stir the paint thoroughly before use

SYSTEM INFORMATION:
Metal

FLASH POINT:
38^oC Degree

THINNING:
Brush or Roller or Spray 10 - 50% depending upon application methodology

COMPOSITION (nominal):
pigment: Red Oxide
Binder: Alkyd.
Solvent: Mineral Turpentine

VOLUME SOLIDS:
44 ± 2% (nominal)

FILM THICKNESS/COAT:
Wet: 50 - 75 Micrometers
Dry : 25 - 35 Micrometers