PRODUCT NAME:
Brighto Super Sealer

USAGE:
Brighto Super Sealer is used for interior masonry surface both new and previously painted surfaces, such as brickwork, plaster and cement. It reduces damage from alkali and salts and seals powdery, porous surfaces.

PACK SIZE:
1L,4L,16L

COLOUR RANGE:
white only

DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry             2 - 4  Hours   
Recoat                  8 - 10   Hours.  
Hard dry             16 - 18 Hours   

PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved
under normal conditions is
12 - 16m² /liter /coat.

APPLICATION:

• Brush
• Roller
• Spray

CLEANING UP:
Clean all equipment with Mineral turpentine
immediately after use.

SURFACE PREPERATION:
New, bare, old or previously painted surface must be clean dry, free from wax and dust. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces completely and make the surface smooth. Dust off with the help of cloth. Stir the paint thoroughly before use.

SYSTEM INFORMATION:

• Powdery surfaces
• Masonry
• Normal, sound surfaces (Previously painted)

THINNING:
Brush or Roller or Spray, 10 - 25 % depending upon application methodology

RECOMMENDATIONS:
Conventional Spray        
Satisfactory through most equipment

FILM PROPERTIES:
Water resistance
Not suitable where the surface is saturated

COMPOSITION (nominal):
Pigment: Lightfast Pigments
Binder: Alkyd
Solvent:  Mineral turpentine

VOLUME SOLIDS:
45 ± 2% (nominal)

FILM THICKNESS/COAT:
Wet:  60 - 75 Micrometers
Dry :  26 - 33 Micrometers