|
 Brighto Super Texture is a high quality acrylic based waterborne texture paint which is used to produce different kinds of textural effects for interior/exterior masonry surfaces such as brickwork, plaster and concrete. It can be over coated with a wide range of colors, which gives pleasing effects.
|
PRODUCT NAME:
Brighto Super Texture
PACK SIZE:
6kg, 24kg
COLOUR RANGE:
white only
FILM PROPERTIES:
Water resistance will tolerate the levels of atmospheric humidity present in normal envirnoments.
COMPOSITION (nominal):
Pigment: Inert filler
Binder: Acrylic copolymer
Solvent: Water
VOLUME SOLIDS:
58 ± 2% (nominal)
FILM THICKNESS/COAT:
Wet: 200 - 250 Micrometers
Dry : 94 - 118 Micrometers
DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry:3-4 Hours
Overcoating with Topcoat:12 - 15 Hours
PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 4 – 5 m2 /L /coat
|
APPLICATION:
Texture Roller
Design Roller
THINNING:
Not required
CLEANING UP:
Clean all equipment with water immediately after use.
SURFACE PREPARATION:
New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the Surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. Remove old masonry surface defects or big holes with a white cement or plaster of paris. Apply Brighto Super Sealer and allow to dry. Apply Brighto Super Filler and allow to dry. Apply Brighto Matt Finish and allow to dry. Now the surface will be smooth and ready for Brighto super texture to be applied.
SYSTEM INFORMATION:
Powdery surfaces
Masonry
Normal, sound surfaces
(Previously painted)
|
|
Super Texture
Copyrights, All rights reserved to Brighto Paints (PVT) LTD