|
 BRIGHTO All Purpose Synthetic Enamel is top quality synthetic enamel made from highest quality resin pigmented with carefully selected pigments. It produces a hard, durable finish and maximum gloss retention. It has excellent brush-ability and opacity. It can be scrubbed hard. It is suitable for both interior and exterior use.
PRODUCT NAME:
BRIGHTO All Purpose Synthetic Enamel
USAGE:
BRIGHTO All Purpose Synthetic Enamel is a high quality solvent-based super gloss finish, suitable for use on all types of interior and exterior wood, metal and cemented surfaces. BRIGHTO Synthetic Enamel gives a smooth mirror like finish and has excellent durability.
PACK SIZE:
0.25L,0.91L,3.64L, 14.56
COLOUR RANGE:
See appropriate shade card
DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry 3 - 4 Hours
Dry to Recoat 10 - 12 Hours
Hard Dry 24 Hours
PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved
under normal conditions is
10 – 20 m2 /liter /coat.
APPLICATION:
Brush
Roller
Spray
SPRAY RECOMMENDATIONS:
Conventional Spray
Satisfactory through most equipment
CLEANING UP:
Clean all equipment with Mineral Turpentine
immediately after use.
SURFACE PREPARATION:
New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces and dust off. Apply Brighto Red Oxide Primer on all metal surfaces in order to prevent from rust. Apply Brighto Undercoat on all Wood surfaces. Apply Brighto Grey Oil putty on all automobile surfaces. Allow the Surfaces to dry completely. Stir thoroughly before use.
SYSTEM INFORMATION:
WOOD
Metal
Automobile
|
FILM THICKNESS/COAT:
Wet: 50 - 75 Micrometers
Dry : 23 - 38 Micrometers
FILM PROPERTIES:
Chemical resistance
Resistant to mild chemical fume attack.
WATER RESISTENCE:
Resistant to the levels of atmospheric humidity present in normal enviroment
COMPOSITION (nominal):
Pigment: Lightfast Pigments
Binder: Alkyd Resin
Solvent: Mineral Turpentine
VOLUME SOLIDS :
White 48 ± 2% (nominal), other colors will vary.
FLASH POINT:
380C
THINNING
Brush or Roller 10 - 25% for Brush or Roller
Conventional spray 30 - 40 % for Spray
|
|
|
Color Palette
|
Off White : 3101 |
Bone White : 3051 |
Ash White : 3042 |
|
Court Grey : 3080 |
Clay : 3055 |
Light Green : 3400 |
Eau-De-Nil : 3073 |
|
Cream : 3001 |
Diyar : 3078 |
Pumice : 3076 |
Brighto Grey : 3005 |
|
Antelope : 3084 |
Sea Green : 3027 |
Spring Green : 3028 |
Lemon : 3006 |
|
Beige : 3050 |
Oyster : 3072 |
Smoke Grey : 3105 |
Champagne : 3077 |
|
Adams Green : 3023 |
Grey Green : 3053 |
Golden Yellow : 3007 |
Pale Cream : 3071 |
|
Light Grey : 3003 |
Dark Grey : 3004 |
Brighto Brown : 3031 |
Emarald : 3022 |
|
Signal Green : 3025 |
Comet Blue : 3070 |
Mauve : 3401 |
Pink : 3052 |
|
Coriander : 3030 |
Dark Brown : 3075 |
Royal Green : 3041 |
Orange : 3002 |
|
Light Blue : 3016 |
Violet : 3033 |
Red Rose : 3020 |
Ochre : 3029 |
|
Royal Blue : 3018 |
Scarab : 3019 |
Crimson : 3012 |
Brighto Blue : 3017 |
|
Deep Blue : 3032 |
Signal Red : 3008 |
Golden Brown : 3074 |
Vivid Blue : 3035 |
|
H.R Blue : 3034 |
P.O Red : 3009 |
Red Oxide : 3011 |
|
|
|
|
|
|
|
Synthetic Enamel
Copyrights, All rights reserved to Brighto Paints (PVT) LTD