|
 BRIGHTO Synthetic Under coat is an excellent quality alkyd based, non absorbent, intermediate coat. It gives maximum enamel hold out and provides smooth tough surface. It is highly recommended for use on all interior and exterior surfaces like wood, metal iron,cement etc. It is over coated with BRIGHTO finishes.
|
PRODUCT NAME:
Brighto Synthetic Undercoat
USAGE:
Brighto Synthetic Undercoat is used on all interior and exterior surfaces like wood, metal iron etc.
PACK SIZE:
0.91L,3.64L
COLOUR RANGE:
White
DRYING TIMES:
Depends on temperature, humidity, air movements and film thickness
Touch Dry 2 - 4 Hours
Recoat 6 - 8 Hours
PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 12 – 18 m2 /liter /coat.
APPLICATION:
Brush
Roller
Spray
RECOMMENDATIONS:
Conventional Spray Satisfactory through most equipment
CLEANING UP:
Clean all equipment with Mineral turpentine immediately after use.
SURFACE PREPARATION:
New, bare, old or previously painted surface must be clean dry, free from wax and dust. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces and dust off.
SYSTEM INFORMATION:
Wood & Metal
|
FILM PROPERTIES:
Water resistance : Resistant to the levels of atmospheric humidity present in normal , not suitable for use on immersed surface
FLASH POINT:
38OC
COMPOSITION (nominal)
Pigment: Lightfast Pigments
Binder: Alkyd
Solvent: Mineral turpentine
VOLUME SOLIDS:
50 ± 2% (nominal)
FILM THICKNESS/COAT:
Wet: 55 - 75 Micrometers
Dry: 25 - 35 Micrometers
THINNING:
10 – 50 % depends upon application methodology
|
|
Synthetic Undercoat
Copyrights, All rights reserved to Brighto Paints (PVT) LTD