PRODUCT NAME:
Brighto Wall Putty 

USAGE:
Brighto Wall Putty is used on all types of interior masonry surfaces. It provides a smooth base for the application of all Decorative products. 

PACK SIZE:
20kg

COLOUR RANGE:
White only

DRYING TIME:
Depends on temperature, humidity, air movements and film thickness
Touch Dry :  2 - 3 Hours
Recoat :       6 - 8 Hours

APPLICATION:
Putty applicator

CLEANING UP:
Clean all equipment with clean water 
immediately after use.

SURFACE PREPARATION:
New ,bare, old or previously painted surfaces must be clean, dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper .Brush down previously painted surface completely and make the surface smooth. For large holes and cracks ,use plaster of paris or white cement .Allow to dry. Apply Brighto Super Sealer in order to seal the surface from water and salts. Allow surface to dry completely. Then apply Brighto Wall Putty.

SYSTEM INFORMATION:
New, Old or previously painted
surfaces

FILM PROPERTIES:
Water resistance  Will tolerate the levels of atmospheric humidity present in normal  environment.

COMPOSITION (nominal):
Pigment : Inert filler
Binder:  Acrylic Copolymer Emulsion.
Solvent: Water

VOLUME SOLIDS:
52 ± 2% (nominal)

FILM THICKNESS/COAT:
Wet :  100 - 150 Micrometers
Dry :   52 – 84  Micrometers

PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 6 - 10 m²/L/coat.

THINNING:
Ready to use