PRODUCT NAME
Brighto Wall Texture

PACK SIZE
6kg, 24kg

COLOUR RANGE
white only

FILM PROPERTIES
Water resistance
(Will tolerate the levels of atmospheric humidity present in normal environments)

COMPOSITION (nominal)
Pigment: inert filler
Binder: Acryliccopolymer
Solvent: Water

VOLUME SOLIDS
58 ± 2% (nominal)

FILM THICKNESS/COAT
Wet: 200 - 250 Micrometers
Dry : 94 - 118 Micrometers

DRYING TIMES
Depends on temperature, humidity, air movements and film thickness
Touch Dry : 3 - 4 Hours
Overcoating with Topcoat : 12 - 15 Hours

PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved
under normal conditions is
4 – 5 m² /L /coat

FILM PROPERTIES
Water resistance
(Will tolerate the levels of atmospheric humidity present in normal environments)

COMPOSITION (nominal)
Pigment: inert filler
Binder: Acryliccopolymer
Solvent: Water

VOLUME SOLIDS
58 ± 2% (nominal)

FILM THICKNESS/COAT
Wet: 200 - 250 Micrometers
Dry : 94 - 118 Micrometers

DRYING TIMES
Depends on temperature, humidity, air movements and film thickness
Touch Dry : 3 - 4 Hours
Overcoating with Topcoat : 12 - 15 Hours

PRACTICAL COVERAGE:
4 – 5 m2 /L /coat under normal conditions isA guide to the practical coverage which can be achieved

APPLICATION:
Texture Roller 
Design Roller 

THINNING
Not required

CLEANING UP
Clean all equipment with water immediately after use.

SURFACE PREPARATION
New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the Surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. Remove old masonry surface defects or big holes with a white cement or plaster of paris. Apply Brighto Super Sealer and allow to dry. Apply Brighto Wall Putty and allow to dry. Apply Brighto Matt Finish and allow to dry. Now the surface will be smooth and ready for Brighto wall texture to be applied.

SYSTEM INFORMATION
Powdery surfaces
Masonry
Normal, sound surfaces
(Previously painted)